Welcome to H&S Performance

Mini Maxx WITH Pyrometer Connection

Mini Maxx WITH Pyrometer Connection

SKU: 119003

« Back to Main Product Info

$999.00

Emissions Warning!

This product is not legal in the state of California for use on any pollution controlled vehicle.

This H&S product may be capable of disabling all or part of the emissions system on certain vehicle applications, when selected by the end user to do so. EMISSIONS REMOVAL IS NOT LEGAL ANYWHERE WITHIN THE USA, UNLESS THE VEHICLE IS NOT REGISTERED WITH THE DIVISION OF MOTOR VEHICLES, AND IS BEING USED SOLELY AS A COMPETITION RACE VEHICLE. BY SELECTING ANY SETTINGS THAT CAN ALLOW REMOVAL OF EMISSIONS EQUIPEMNT, YOU ACCEPT ALL RISK AND LIABILITY ASSOCIATED WITH ITS USE, AND AGREE TO THE FOLLOWING TERMS AND CONDITIONS.

  1. All settings or calibrations that may allow emissions removal are intended and developed for off-highway, organized, sanctioned, closed-course RACE/COMPETITION USE ONLY! Any other use, on ANY road, public or private, within the USA, is STRICTLY PROHIBITED.
  2. H & S Performance insists that you do not select any calibrations or settings if this vehicle has been registered or certified for highway use within the USA.
  3. This product when used incorrectly may violate local, state, and federal laws pertaining to emissions, traffic, registration, and safety.
  4. Use of this product may damage or destroy mechanical and/or electrical components of this vehicle.
  5. Use of this product may void or nullify the vehicles factory warranty.
  6. User understands that motorsports are dangerous, and that installation of this product may subsequently require special driving skills or techniques to safely operate the vehicle.
  7. User assumes sole responsibility for the safe, proper, and legal use of the vehicle at all times.
  8. The purchaser and end user releases, indemnifies, discharges, and holds harmless H&S Performance, LLC from any and all claims, damages, causes of action, injuries, or expenses resulting from or relating to the use or installation of this product that is in violation of the terms and conditions on this page, the product disclaimer, and/or the product installation instructions. H&S Performance will not be liable for any direct, indirect, consequential, exemplary, punitive, statutory, or incidental damages or fines cause by the use or installation of this product.

Warning!

Before allowing you to access any settings or calibrations that may allow emissions removal, you will be asked by the tuner to electronically agree to the terms and conditions listed above. By electronically agreeing to the terms and conditions, you are certifying that you are aware of and assume all risk, liability, and consequences that may arise from its use.

USE AT YOUR OWN RISK!

Applications

  • 2006 - 2007 Dodge 5.9 Cummins   2500-3500
  • 2007.5 - 2009 Dodge 6.7 Cummins   2500-5500
  • 2010 - 2012 Dodge 6.7 Cummins   2500-5500
    (includes 2011 High Output 800 torque models)
    (Does NOT include 2012 Cab & Chassis models)
  • 2007 - 2010 Duramax 6.6 LMM   2500-5500
  • 2008 - 2010 Ford 6.4 Powerstroke   F250-F550
  • 2003 - 2007 Ford 6.0 Powerstroke   F250-F350
  • 2011-2012 Ford 6.7 Powerstroke   F250-F550 (Must purchase software unlock code part# 111005)
  • 2011-2012 GM Duramax 6.6 LML 2500-3500 (**May also need part #111006) 

Standard Features

  • Comes preloaded with DPF Present and DPF Removed capable tuning
  • Allows removal of the DPF system and ALL related sensors
    (nothing needs to go into the race exhaust or even be plugged in)
  • Reads/Clears Diagnostic Trouble Codes
  • Internet Update-able with included SD Memory Card & USB adapter
  • Automatic safety backdown. adjustable by EGT, Boost, Trans. Temp, and Coolant Temp
  • Custom Tunes are FREE to download.  Check the Mini Maxx Updates section to see what is available for your product.

Vehicle Specific Features

 
 
 

Tech Notes

Customer Reviews

5 Item(s)

per page
  • Review by Bill
    March 9, 2011
    I purchased and installed the Mini-Maxx on my 2009 Duramax. Took a 200-mile trip through the mountains of Colorado just before installation and got 19.0 mpg. Drove it the same way at the same speeds on the same road and after installation I got 25.5 mpg. Have not yet tried it pulling a fifth-wheel.
  • Review by JB
    December 3, 2010
    This product is the best I have EVER used. The install and use give it the feel of a product that was made by people who also use it. Very user friendly and PACKED full of every function you could want. Can't wait for the nitro/meth support.
  • Review by jmontgomery
    September 25, 2010
    First time diesel owner. Bought the 2010 6.7 Larimie with 35's. Programed it with the mini with just 1300 miles. Milage went from 12-14 to 18 in town and 23.4 interstate. WOW!!! Amaizing product.. You can't own a diesel and not wake it up with H&S. Wish the trany tune were a little cheaper after purchasing the tuner though.
  • Review by Joe @ Custom Diesel
    September 14, 2010
    I have found that it is really easy to depress the lock tabs on the side of the OBDll connector, then turn it around pointing up and install the plug facing upwards under the dash. Very very clean install method keeps knees from bumping the plug on entry and exit of vehicle!!
  • Review by EDBD Specialties
    August 4, 2010
    This being my first install of H&S Product it was a quick easy install, tuning seems to be pretty good. would like to see the OBDII connection a little more out of the way also Instructions could be updated but under stand how new trucks change a bit. Have been using EDGE products on most of my installs but now will highly recomend the H&S Tuners for sure! Install was on 2010 Dodge Ram

5 Item(s)

per page

Fatal error: Call to a member function getChild() on a non-object in /home/hsper0/public_html/store/app/design/frontend/default/akihabara/template/review/product/view/list.phtml on line 69