Mini Maxx W/O Pyrometer Connection

SKU: 109003

$949.00

Quantity

Availability: In stock

Info

This part number does NOT include the Pyrometer Connection for reading Exhaust Gas Temperatures.

The Pyrometer connection is NOT necessary for the Mini Maxx to function correctly. It is used for gauge display and for one of the defueling parameters. It will NOT harm your truck to run without a pyrometer probe installed. We do, of course, recommend purchasing one for the 6.7 Cummins and 6.6 LMM Duramax so you can monitor your Exhaust gas temperatures and set your defuel levels based on EGTs. Ford 6.4 Powerstroke trucks can use a factory sensor in the manifold to monitor EGT. Ford 6.7L Powerstroke can purchase Part # 302202 or Part # 302201 to monitor EGTs.

Emissions Warning!

This product is not legal in the state of California for use on any pollution controlled vehicle.

This H&S product may be capable of disabling all or part of the emissions system on certain vehicle applications, when selected by the end user to do so. EMISSIONS REMOVAL IS NOT LEGAL ANYWHERE WITHIN THE USA, UNLESS THE VEHICLE IS NOT REGISTERED WITH THE DIVISION OF MOTOR VEHICLES, AND IS BEING USED SOLELY AS A COMPETITION RACE VEHICLE. BY SELECTING ANY SETTINGS THAT CAN ALLOW REMOVAL OF EMISSIONS EQUIPEMNT, YOU ACCEPT ALL RISK AND LIABILITY ASSOCIATED WITH ITS USE, AND AGREE TO THE FOLLOWING TERMS AND CONDITIONS.

All settings or calibrations that may allow emissions removal are intended and developed for off-highway, organized, sanctioned, closed-course RACE/COMPETITION USE ONLY! Any other use, on ANY road, public or private, within the USA, is STRICTLY PROHIBITED.
H & S Performance insists that you do not select any calibrations or settings if this vehicle has been registered or certified for highway use within the USA.
This product when used incorrectly may violate local, state, and federal laws pertaining to emissions, traffic, registration, and safety.
Use of this product may damage or destroy mechanical and/or electrical components of this vehicle.
Use of this product may void or nullify the vehicles factory warranty.
User understands that motorsports are dangerous, and that installation of this product may subsequently require special driving skills or techniques to safely operate the vehicle.
User assumes sole responsibility for the safe, proper, and legal use of the vehicle at all times.
The purchaser and end user releases, indemnifies, discharges, and holds harmless H&S Performance, LLC from any and all claims, damages, causes of action, injuries, or expenses resulting from or relating to the use or installation of this product that is in violation of the terms and conditions on this page, the product disclaimer, and/or the product installation instructions. H&S Performance will not be liable for any direct, indirect, consequential, exemplary, punitive, statutory, or incidental damages or fines cause by the use or installation of this product.

Warning!

Before allowing you to access any settings or calibrations that may allow emissions removal, you will be asked by the tuner to electronically agree to the terms and conditions listed above. By electronically agreeing to the terms and conditions, you are certifying that you are aware of and assume all risk, liability, and consequences that may arise from its use.

USE AT YOUR OWN RISK!

Applications

2006 - 2007 Dodge 5.9 Cummins 2500-3500
2007.5 - 2009 Dodge 6.7 Cummins 2500-5500
2010 - 2012 Dodge 6.7 Cummins 2500-5500

(includes 2011 High Output 800 torque models)
2007 - 2010 Duramax 6.6 LMM 2500-5500
2008 - 2010 Ford 6.4 Powerstroke F250-F550
2003 - 2007 Ford 6.0 Powerstroke F250-F350
2011-2012 Ford 6.7 Powerstroke F-250-F550 (Must purchase software unlock code part# 111005)
2011-2012 GM Duramax 6.6 LML 2500-3500 (**May also need part #111006)

Standard Features

Comes preloaded with DPF Present and DPF Removed capable tuning
Allows removal of the DPF system and ALL related sensors
(nothing needs to go into the race exhaust or even be plugged in)
Reads/Clears Diagnostic Trouble Codes
Internet Update-able with included SD Memory Card & USB adapter
Automatic safety backdown. adjustable by EGT, Boost, Trans. Temp, and Coolant Temp
Custom Tunes are FREE to download. Check the Mini Maxx Updates section to see what is available for your product.

Vehicle Specific Features

2006-2007 5.9L Cummins

2007.5-2009 6.7L Cummins

2010-2012 6.7L Cummins

2008-2010 Duramax LMM

2011-2012 Duramax LML/LGH

2003-2007 6.0L Powerstroke

2008-2010 6.4L Powerstroke

2011-2012 6.7L Powerstroke

Tech Notes

Installation Instructions
Mini Maxx Tuning and Feature Updates
Many answers can be found at the H&S Forum
Custom Mounting Solutions go HERE
Ford 6.7L Powerstroke users must also purchase Part # 111005
2011 6.6L Duramax LML Emissions removed race tuning will also require the purchase of Part # 111006